Elesa+Ganter HCV-ST oil electrical level indicator.
In addition to the visual control, HCV-ST column level indicator, generates an electric signal when the temperature reaches the pre-set degrees (80°C). Ultrasound welding to guarantee a perfect seal. Maximum fluid level visibility even from side positions. Lens effect for a better visibility of the fluid level.
Highly resistant to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naphtha, phosphoric esters.
Avoid contact with alcohol or detergents containing alcohol.
Material:
Transparent polyamide based (PA-T) technopolymer.
Screws, nuts and washers in zinc-plated steel.
Packing rings are step-shaped for the seal on the reservoir walls and NBR synthetic rubber O-ring under screw head. Suggested roughness of the packing ring application surface Ra = 3 µm.
Sensor bracket in watertight in glass-fibre reinforced polyamide based (PA) technopolymer, black colour, with MAX temperature sensor (80°C).
Swivelling connector wWith built-in cable gland and contact holder. Front or axial output (high or low) ensuring protection against water sprays (protection class IP 65 according to table EN 60529 table-).
Contrast screen in white lacquered aluminum. The housing, in the appropriate external rear slot, guarantees the best protection from direct contact with fluid. It can be taken out from the inclined side, before assembly to allow the insertion of level lines or words/letters.
Standard executions:
HCV-ST-NO: with electric contact normally open (NO).
HCV-ST-NC: with electric contact normally closed (NC).
Maximum continuous working temperature: 90°C (with oil).
