E+G GN 817.3 indexing plunger
Elesa+Ganter GN 817.3 Indexing plunger
Developed to enable precise locating when guide bushes DIN 172 or DIN 179 are used. For this purpose as a rule, as a plain guide bush (Type A), is used whereby the dimension l3 of the plunger determines the length of the bush.
The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance G6) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch is provided for the key to prevent the plunger from turning by error or vibration.
Material: Black-oxide steel.
Plunger: Hardened and ground steel.
Plastic knob: Polyamide based (PA) technopolymer, black colour, matte finish, not removable.
Standard executions available:
- Version B: without rest position.
- Version C: with rest position.
